Page 1 of 1
Recommended Supplier
Posted: Thu Apr 28, 2016 7:11 pm
by Brumbach
What supplier/mfg do you recommend for the L134 valves, guides, springs and tappets?
Thanks,
Posted: Thu Apr 28, 2016 11:40 pm
by wesk
Most can be purchased through your local auto parts store. Just a reminder you should get the engine torn down, hot tanked and inspected and dimension checked before shopping parts. The lifters are available in over sizes. This was to accommodate heavy lifter bore wear. It;s a real Pita to get one rebuilt and find out you can only get 20 PSI of oil press because the lifter bores are worn excessively. Also only the front cam journal has a bearing so check the other journals and bores closely.