Page 1 of 1
M170 Late battery box lid hardware
Posted: Sun May 01, 2016 8:36 am
by bl5211a
Hi:
Does someone have the part numbers for the late style battery box lid hardware.
trying to figure out the footman loop mounting hardware (Screws and nuts for the footman loops)
Brian
M170
Posted: Sun May 01, 2016 11:33 am
by 4x4M38
Page 322 of your ORD 9 SNL G-758 available on the downloads at left:
WO-684730 LOOP, footman, drilled, 2.120 in. (battery box cowl lid)
(used on vehicles after serial No. 63252)
155937 BOLT, MACHINE, cross recess-fl-hd, S, cd- or znpltd,
No. 10 (0.190)-24NC2 x W
271166 NUT, hex, ext-teeth-lock washer, S, cd- or zn-pltd,
No. lo-24NC-2A
It looks like most of the footman loops were attached with this hardware.
Take care,
Posted: Sun May 01, 2016 11:42 am
by 4x4M38
Sorry fat fingers. The W should be 1/2.
1/2" long.
Posted: Sun May 01, 2016 12:29 pm
by bl5211a
Thanks! I was looking in group 6.
Regards, Brian
Posted: Sun May 01, 2016 1:41 pm
by 4x4M38
Don't feel bad, it took me a while to find it!