Page 1 of 1

Rear light switch six pin connector

Posted: Sun Jul 31, 2016 9:27 am
by 4x4M38
Six pin plug for two connector Bendix
light switch.

For those folks that have the two connector light switch
and want to keep the separate rear harness. I searched
a while and could not find one of the Bendix OEM plugs.

This guy on eBay had a six pin plug with male end and
swapped the internals out to make it female. It screws
right into the Bendix light switch.

It is not OEM but will work and was probably a replacement
when the original was damaged.

http://m.ebay.com/itm/Willys-Jeep-Wire- ... nav=SEARCH

Posted: Sat Oct 01, 2016 6:07 pm
by BCA
NOS plugs are not a problem for the early 2-plug light switch. PM me if you need one... Brian

Posted: Sat Oct 01, 2016 7:42 pm
by 4x4M38
Thanks Brian!

I have found one, but am sure others can appreciate the lead.