I picked up a couple of speedo cables from a guy that swore they were for a M38. As my 51 didn't have one I don't have one to compare it with. These are packaged in the later foil packs with the following numbers:
3040-00-094-1631
SHAFT, ASSY, FLEX
DSA700-76-M-9483
C/C --10/75
These are of course the later inventory numbers and are not referenced in the ORD9. If anyone has the ability to reference these numbers I would sure appreciate it. These cables would probably work on a willys but I don't think they are correct for a 51 M38. Does anyone have a source for NOS speedo cables? Looks like they are probably M151.
Thanks
M38 speedo cable question
Moderators: TomM, Moderator, wesk
-
Scrounger
- Member
- Posts: 22
- Joined: Sun Apr 10, 2005 6:00 pm
- Location: Houston, Tx
-
kiowamtp
- Member
- Posts: 19
- Joined: Wed Mar 29, 2006 6:00 pm
Try http://www.debellajeepparts.com/
As far as you NSN I am not sure. I will look it up tomorrow when at work, but it is a much later date as well as a newer NIIN sequence.
As far as you NSN I am not sure. I will look it up tomorrow when at work, but it is a much later date as well as a newer NIIN sequence.
-
Ryan_Miller
- Site Administrator
- Posts: 1668
- Joined: Sat Apr 02, 2005 6:00 pm
- Location: Kansas
-
Cody
- Member
- Posts: 1
- Joined: Tue Sep 26, 2006 6:00 pm
Just did a few Google queries and got a little info on yer NIIN.
3040-00-094-1631
Crosses to PN 88959466
CAGE#70040 (GENERAL MOTORS CORP AC ROCHESTER DIV )
ACDELCO Part # 88959466
CABLE,SPEEDO LWR 4WD; w/CRCONT(K30); FLEX W/CASING-2025MM
Some listed typical Apps:
1982 CHEVROLET K10 SUBURBAN 5.7L
1982 GMC K25/K2500 PICKUP 6.2L
1982 CHEVROLET K10 PICKUP 5.7L
1982 CHEVROLET K30 PICKUP 4.8L
1983 CHEVROLET K10 PICKUP 6.2L
Cody
3040-00-094-1631
Crosses to PN 88959466
CAGE#70040 (GENERAL MOTORS CORP AC ROCHESTER DIV )
ACDELCO Part # 88959466
CABLE,SPEEDO LWR 4WD; w/CRCONT(K30); FLEX W/CASING-2025MM
Some listed typical Apps:
1982 CHEVROLET K10 SUBURBAN 5.7L
1982 GMC K25/K2500 PICKUP 6.2L
1982 CHEVROLET K10 PICKUP 5.7L
1982 CHEVROLET K30 PICKUP 4.8L
1983 CHEVROLET K10 PICKUP 6.2L
Cody
-
wesk
- Site Administrator
- Posts: 16413
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
With a contract date of 10/75 I doubt they were ever meant for a M38.
The Ordnance supply stock numbers were used from WWII thru the late 50's. The Federal Stock Numbers (FSN)(xxxx-xxx-xxxx) came in the 50's and switched to the NSN (xxxx-xx-xxx-xxxx) in the 70's.
M38 Shaft, assy flexible Thru MC44029 54.5"
ORD PN 7527480 ORD Stk # G740-7527480 FSN 6680-752-7480
M38 Shaft, assy flexible after MC44029 56.75"
ORD PN 7389881 ORD Stk # G744-7389881 FSN 6680-832-7566
(For those of you wondering what a G744 vehicle is: G744 Diamond T, et al, 5 ton, 6X6 Truck, Dump, Tractor, Cargo, Wrecker)
M38A1 Shaft, assy, flexible
ORD PN 7389881 ORD Stk # (Non listed) FSN 6680-832-7566
M151 Shaft, assy
NSN 6680-00-973-4187
My guess is your shaft assy's are much newer than any of these.
The Ordnance supply stock numbers were used from WWII thru the late 50's. The Federal Stock Numbers (FSN)(xxxx-xxx-xxxx) came in the 50's and switched to the NSN (xxxx-xx-xxx-xxxx) in the 70's.
M38 Shaft, assy flexible Thru MC44029 54.5"
ORD PN 7527480 ORD Stk # G740-7527480 FSN 6680-752-7480
M38 Shaft, assy flexible after MC44029 56.75"
ORD PN 7389881 ORD Stk # G744-7389881 FSN 6680-832-7566
(For those of you wondering what a G744 vehicle is: G744 Diamond T, et al, 5 ton, 6X6 Truck, Dump, Tractor, Cargo, Wrecker)
M38A1 Shaft, assy, flexible
ORD PN 7389881 ORD Stk # (Non listed) FSN 6680-832-7566
M151 Shaft, assy
NSN 6680-00-973-4187
My guess is your shaft assy's are much newer than any of these.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
-
kiowamtp
- Member
- Posts: 19
- Joined: Wed Mar 29, 2006 6:00 pm
Supplier Data Response for NSN 3040-00-094-1631
Item Name: SHAFT ASSEMBLY,FLEXIBLE
CAGE Code: 70040 Status: A Type: A CAO: S2305A ADP: HQ0337
Company Name and Address:
GENERAL MOTORS CORP AC ROCHESTER DIV
4800 S SAGINAW ST
P.O. BOX 1360 Phone: 810-835-8322
FLINT MI 48501-1360 FAX:
UNITED STATES
RPLM Code: ASSOC Code: 24617 AFFIL Code: D
SIZE: E Primary Business: J Type of Business: N Women Owned: N
SIC Codes:
Here is what I pull up with the current Federal Logistics data
Item Name: SHAFT ASSEMBLY,FLEXIBLE
CAGE Code: 70040 Status: A Type: A CAO: S2305A ADP: HQ0337
Company Name and Address:
GENERAL MOTORS CORP AC ROCHESTER DIV
4800 S SAGINAW ST
P.O. BOX 1360 Phone: 810-835-8322
FLINT MI 48501-1360 FAX:
UNITED STATES
RPLM Code: ASSOC Code: 24617 AFFIL Code: D
SIZE: E Primary Business: J Type of Business: N Women Owned: N
SIC Codes:
Here is what I pull up with the current Federal Logistics data
-
Scrounger
- Member
- Posts: 22
- Joined: Sun Apr 10, 2005 6:00 pm
- Location: Houston, Tx
Thanks for the info.
Thanks to all for your responses. I knew they didn't look right when I got them but some times you have to just roll the dice and see what turns up.
Best wishes to all and thanks again.
Ross
Best wishes to all and thanks again.
Ross