Page 1 of 1
Fabrication
Posted: Fri Mar 03, 2017 10:55 am
by 4x4M38
Found this quite by accident looking for something else.
Just a shout out to the fabricators amongst us:
http://www.willysmjeeps.com/v2/modules. ... t=drawings
Posted: Fri Mar 03, 2017 2:41 pm
by RICKG
We have not heard from Jose in several years now. Very ambitious engineer and fabricator. Last project I worked with him on was a 12V coil conversion to the 4006AUT dizzy (all I did was provide some measurements) don't know if it worked (electrically) or not.
http://willysmjeeps.com/v2/modules.php? ... t=explorer
Posted: Fri Mar 03, 2017 5:22 pm
by 4x4M38
If I remember he fabbed something else as well. Spare tire carrier? Was that him? This is a tricky little deal. Clever that one. Reminds me of your neighbor to the southwest.
Built a sheetmetal brake out of a workbench, a length of angle
and some flat bar.
Sure wish he was closer to me.....
Posted: Sun Mar 05, 2017 8:51 am
by Bretto
I think it was a Jcan holder you might be thinking of
http://www.willysmjeeps.com/v2/modules. ... ght=holder
Posted: Sun Mar 05, 2017 9:23 am
by 4x4M38
Yep! That was it!
How you been Bretto?