wanted
Posted: Tue Mar 21, 2017 8:17 pm
wanted. looking for this part, don't know the name of it
Page 1 of 1
Posted: Tue Mar 21, 2017 9:22 pm
That's the lunette support bracket Bob.
Posted: Tue Mar 21, 2017 11:46 pm
Bob, Just go to our downloads page and download the M100 Maint/Parts Manual:
http://www.willysmjeeps.com/v2/modules. ... it&lid=160
You'll find part numbers and stock numbers there that will make your search easier.
Fig's C-11 & C-12 0n Page G-27 and the parts listing pages are C-12, C-13 & c-14.
http://www.willysmjeeps.com/v2/modules. ... it&lid=160
You'll find part numbers and stock numbers there that will make your search easier.
Fig's C-11 & C-12 0n Page G-27 and the parts listing pages are C-12, C-13 & c-14.
Posted: Wed Mar 22, 2017 6:38 am
Yes, that's where I found it.
I did a drive by on EBay, Midwest Military, Rapco, DeBella, AJP,
RJ Fitzpatrick and a couple of others. I did not see it for sale anywhere.
I suspect you'll just have to call a few and ask. Most have lots more
than they show online.
Take care,
I did a drive by on EBay, Midwest Military, Rapco, DeBella, AJP,
RJ Fitzpatrick and a couple of others. I did not see it for sale anywhere.
I suspect you'll just have to call a few and ask. Most have lots more
than they show online.
Take care,
Lunette holder.
Posted: Wed Mar 22, 2017 7:28 am
I have one from a 416 [Vietnam era] trailer if it will work.
Posted: Wed Mar 22, 2017 9:59 am
The 416 frame is wider so the V angles do not match.
Lunette holder.
Posted: Wed Mar 22, 2017 12:39 pm
I agree on the width. Looks like the 416 is three inches wider.
Lunette holder.
Posted: Wed Mar 22, 2017 12:43 pm
Maybe I missed it but I didn't see which trailer he had.
Posted: Wed Mar 22, 2017 1:24 pm
Stepping out once again onto that ledge.
A previous post:
http://www.willysmjeeps.com/v2/modules. ... highlight=
Maybe it's for a different trailer...
A previous post:
http://www.willysmjeeps.com/v2/modules. ... highlight=
Maybe it's for a different trailer...
Posted: Wed Mar 22, 2017 4:26 pm
This part is very rare and hard to find... will work on the MBT (WWII Trailer) and the M-100 Trailer...
The dual hole one is for the m-416 trailer is much more prevalent...
It will work in a pinch, but mods might need to be made or shims.
Good luck with your search, there were rumors about there being a reproduction out of the Philippines, but I have not seen any....
The dual hole one is for the m-416 trailer is much more prevalent...
It will work in a pinch, but mods might need to be made or shims.
Good luck with your search, there were rumors about there being a reproduction out of the Philippines, but I have not seen any....
Posted: Wed Mar 22, 2017 7:15 pm
Billybob,
This is an M100 trailer forum and the casting in his photo is an M100 casting.
M100 (also fits MBT)
WWII MBT & T3 bracket
M416 Bracket
Here's an outfit that lists one in their on line catalog: Front Line MV's
http://www.flmv.net/FLMV-M416.htm
This is an M100 trailer forum and the casting in his photo is an M100 casting.
M100 (also fits MBT)
WWII MBT & T3 bracket
M416 Bracket
Here's an outfit that lists one in their on line catalog: Front Line MV's
http://www.flmv.net/FLMV-M416.htm
Lunette holder.
Posted: Wed Mar 22, 2017 7:59 pm
Stupid me! I should have remembered mine has two holes. I apologise for any confusion. I was just trying to help a fellow Jeeper.
Posted: Wed Mar 22, 2017 8:59 pm
We are all good! Help is always appreciated.
Nice find Wes.
Nice find Wes.