Page 1 of 1
oil filter canister - marked or unmarked
Posted: Sat Apr 22, 2017 12:00 pm
by keats
I have a 1954 M170 with what i believe is the standard military Jr. canister.
http://willysmjeeps.com/v2/modules/gall ... .sized.jpg
http://willysmjeeps.com/v2/modules/gall ... .sized.jpg
The top of my filter does not have any identifiing numbers, or lettering stating its a standard military jr. canister. f
My question is, did all military standard jr. filter canisters have
that stamped on its top, or some part number? Were later canisters unmarked?
What do you have on your M38A1 or M170?
_________________
Posted: Sun Apr 23, 2017 8:01 am
by 4x4M38
Posted: Sun Apr 23, 2017 8:07 am
by 4x4M38
Here is more data from an earlier thread:
http://www.willysmjeeps.com/v2/modules. ... ram+filter
I'd say you have an early CJ2A filter application that someone used to replace the CUNO.
Take care,
Posted: Sun Apr 23, 2017 5:46 pm
by keats
the filter canister cover on eBay measures 5 inches in diameter ( asked the seller) . My canister cover measures 5 1/2 inches which is the correct size for the military standard. Also, my filter canister has dimples on the bottom. It also takes a NAPA 1100 filter which is also correct for the military standard filter canister. So I do not have a cj2a filter canister on my m170.
Posted: Wed Apr 26, 2017 3:06 pm
by keats
For what its worth, as no one else has responded, but as proof of such covers:
The pictures below are of WeeBee webbing's M170, which is regarded as one of the best examples of the jeep model. His filter cover has no markings
http://willysmjeeps.com/v2/modules/gall ... .sized.jpg
http://willysmjeeps.com/v2/modules/gall ... .sized.jpg
Posted: Wed Apr 26, 2017 9:46 pm
by wesk
I am reluctant to say without actual positive evidence that any cover is correct or not correct that fits the military junior filter. The Army has a habit of seeking numerous suppliers to supply parts to a common spec over the last 60 years. The unmarked covers could easily be a new cover procured in the field from a supply system that has no need to keep things factory original.
As for Wee Bee's M-170 I do not believe that having an example of a part installed on a nicely restored jeep is without any doubt proof that the part is the correct original for that application.
Some day one of us will stumble across the blue print used for the Willys/Kaiser installed military junior filter detailing the appearance of the lid and a factory production line BOM to establish what stocks of juniors were used. Hint-----Keith B.
