M38A1 wiring in ORD 9 question
Posted: Wed May 17, 2017 10:41 pm
HI Guys,
In the ORD on pg 122 and 124 are wiring illustrations for the A1 and the M170 respectively labeled Fig 06-11 and Fig 06-12. Fig 11 shows how the harnesses are routed in the A1. But I'm not positive I understand Fig 12, which is labeled M170. Is this figure only showing me what's different in the M170'same harness.....meaning everything else not shown is identical to the A1 harness?
Thanks,
Bob
In the ORD on pg 122 and 124 are wiring illustrations for the A1 and the M170 respectively labeled Fig 06-11 and Fig 06-12. Fig 11 shows how the harnesses are routed in the A1. But I'm not positive I understand Fig 12, which is labeled M170. Is this figure only showing me what's different in the M170'same harness.....meaning everything else not shown is identical to the A1 harness?
Thanks,
Bob