Page 1 of 1
M38 tool box lids.
Posted: Thu May 25, 2017 12:20 pm
by radtech
I have two NOS tool box covers that were bought as for M38.One has wide curved corners that fits my M38 but the 2nd. has more squared corners and it does not fit my M38. part number 2510-737-5350.Any idea what it is for?
Posted: Thu May 25, 2017 12:57 pm
by wesk
2510-737-5350 is in the M38A1 ORD 9. All that it took to find this answer is to google the federal stock number.
Posted: Thu May 25, 2017 4:51 pm
by radtech
I have been told that the tool box lid on the M38A1 is the same as the M38 which is why I am confused.The FSN crosses over to the M38 in ORD 8 SNL G-740 1956
Posted: Thu May 25, 2017 5:27 pm
by 4x4M38
This subject was discussed over on the G with photos.
A quandry indeed.
Posted: Thu May 25, 2017 6:27 pm
by radtech
On G503 with no results.
Posted: Thu May 25, 2017 6:42 pm
by 4x4M38
Stand by....
Posted: Thu May 25, 2017 6:45 pm
by 4x4M38
Ha!
It was your post from January with no decent results!!
For the Brethren, here is a link, with photos of the
two kids:
http://g503.com/forums/viewtopic.php?f=105&t=282890
Posted: Thu May 25, 2017 8:24 pm
by radtech
Both have the same part number but definitely not the same part.