Starting an M38 after setting for years
-
radtech
- Active Member
- Posts: 204
- Joined: Sun Aug 08, 2010 6:00 pm
Starting an M38 after setting for years
I am fixing to crank up my M38 after setting for 10 years.Is there anything I sould do lubrication wise before I try to start it?
-
wesk
- Site Administrator
- Posts: 16463
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
1-Pre-oil oil system under pressure.
2-Have you inspected bores to determine if they are rusty?
3-Insure you have fresh gas.
4-Check coolant level.
2-Have you inspected bores to determine if they are rusty?
3-Insure you have fresh gas.
4-Check coolant level.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php