Page 1 of 1
Cowl battery box removal M38
Posted: Tue Oct 10, 2017 11:31 am
by Trip
How does one remove an original cowl battery box on an M38? The bottom panel appears to be attached with a few phillips head screws but I do not see where and how to separate the main structure from the M38 body.
Trip
Posted: Tue Oct 10, 2017 12:10 pm
by wesk
You must drill out all the spot welds around the top flange!
Posted: Tue Oct 10, 2017 12:14 pm
by Trip
Are the spot welds above the cowl or below ? Maybe there is too much primer to see the spot welds.
Thanks Wes
Posted: Tue Oct 10, 2017 12:35 pm
by wesk
Posted: Tue Oct 10, 2017 12:41 pm
by Trip
Thanks Wes. I always feel like an idiot when I thought i looked for this information. Thought i would not have to bother you.
trip
Posted: Tue Oct 10, 2017 12:44 pm
by wesk
No problem Tripp. Just always look in my photo album before you post any question.
