Page 1 of 1
M38A1 parts vendor wanted
Posted: Wed Nov 29, 2006 6:56 am
by JohnC
I have an early M38A1 (tilt grill etc) kit. I mean the body is off the frame, the rebuilt engine is on a cherry picker and I have seperated the boxes of parts into their various groups. I had turned in an order for parts to a vendor who strung me along for a week or so only to tell me most of the stuff was back ordered and would take about a month to get. Is there a reliable vendor or source for springs, cables, bumperetts, clutch parts,etc?
John Christoff
Texas
Posted: Wed Nov 29, 2006 8:54 am
by usma41
Did you try Midwest Jeep parts? The owner is a member of this forum.
Posted: Wed Nov 29, 2006 1:45 pm
by DJ
Posted: Wed Nov 29, 2006 6:03 pm
by Bob_C
John Bizal of Midwest Military is one of the best I have ever dealt with. Army Jeep Parts (George Baxter) also is a good guy. Both will get you what you need, and you will never have to gripe about parts not fitting correctly.
http://www.midwestmil.com
http://www.armyjeepparts.com
vendor
Posted: Thu Nov 30, 2006 7:10 pm
by hillbilly21
Curious as to who the vendor is as I will also stay away...I had the same problem with one of my FORMER vendors with a body kit and parts....