m38 starter plunger switch rubber button
Posted: Sat May 19, 2018 11:08 am
Just an FYI and any additional info if found.
I know they are very available and have them on 3 of my jeeps but:
No mention of rubber button that I can find in ORD7 and ORD 8 for m38, and ORD 9 in both m38 and m38A1.
I have knowledge from friend that the button is mentioned in the m37 parts book.
I found the parts box picture (linked below) on line and its a very early box. The group # on box 15-13 is for starter control switch on cj3A but no mention of the button or part # for it in the cj2a-3a parts manuals.
found several part #’s for button- 699482, 693508, 7351198( m37), 646617, 646702 (in early 50's jeep station wagons, trucks parts manual)
federal stock # 2920-00-562-0417 and its used a lot in aircraft
May be included with switch as part of an assembly but the switch is broken down in ORD 9 with no mention of the button?
http://willysmjeeps.com/v2/modules/gall ... 8024_G.jpg
I know they are very available and have them on 3 of my jeeps but:
No mention of rubber button that I can find in ORD7 and ORD 8 for m38, and ORD 9 in both m38 and m38A1.
I have knowledge from friend that the button is mentioned in the m37 parts book.
I found the parts box picture (linked below) on line and its a very early box. The group # on box 15-13 is for starter control switch on cj3A but no mention of the button or part # for it in the cj2a-3a parts manuals.
found several part #’s for button- 699482, 693508, 7351198( m37), 646617, 646702 (in early 50's jeep station wagons, trucks parts manual)
federal stock # 2920-00-562-0417 and its used a lot in aircraft
May be included with switch as part of an assembly but the switch is broken down in ORD 9 with no mention of the button?
http://willysmjeeps.com/v2/modules/gall ... 8024_G.jpg



