willysmjeeps.com

I’m looking for the specs on the hose used for the air intake hose of the snorkel. Where could I find one even if it’s not NOS or used.

Here is the part number for a Heavy Duty Air Intake Hose by Gates. You have to buy it in 10 foot sections and its available at:

Rockauto.com Type In the part number in the search block and it should take you right to it.


Gates 23634---2 1/8 ID Air Hose/Fording Hose form Air Filter up to top of Windshield. It will come with a Red Stripe. The hose itself is very Heavy Duty.

Contact John Bizal at Midwest Military... That is where I got mine from, will admit it was years ago but I bet he still carries it...

Also checkout my photo albums: http://www.willysmjeeps.com/v2/modules. ... _album.php

Specifically "Fording Kits": http://www.willysmjeeps.com/v2/modules. ... _album.php







Willys PN 802041

If I recall it is 2.5" ID. Here's a suitable replacement for $28.50 for 12.5 feet of it. https://ducting.com/products/pe-flex-ultra-flexible

Harold, thank you!

Wes, I didn’t have page 2 thanks Lyle

I have the snorkel on my M-38 CDN and want to pass on that performance will drop with the snorkel attached. It is a loong draw for the air to get to the carb with the snorkel attached... I attach mine for shows but take it off for daily driving....