Page 1 of 1
YS 637 Carter Carb Repair
Posted: Tue Nov 06, 2018 7:53 pm
by bluetractor
Have the YS 637 Carb. One of the screws is stripped on the main body. Is there any repair available for this? Its one of the screws that secure the throttle body to the main body.
Posted: Tue Nov 06, 2018 8:00 pm
by Mike_B
Posted: Wed Nov 07, 2018 6:13 pm
by bluetractor
After looking carefully at the hole, it has already been drilled and tapped for a 10/32 helicoil and that heilcoil has come out with the screw. I inserted a 10/32 tap and it falls right into the hole. Any other ideas? Thanks.
Posted: Wed Nov 07, 2018 8:04 pm
by wesk
Try inserting another helicoil of the same type. If that doesn't hold up then there are larger solid inserts that us a very slightly larger hole.
Posted: Sun Nov 11, 2018 4:31 pm
by bluetractor
After a week of catch up I find the screws are actually 12/28". Now to find a reasonably priced repair kit. Thanks for the assist.
