willysmjeeps.com

Posted: **Thu May 30, 2019 7:53 am**

I acquired a 1951 M38 with an Engine BLOCK ASSY LV7/AWO A6793. From my research this LV7/AWO engine was made by Willys for the British Military. My setup in the M38 is wired and plumbed as a 6V system. Does anyone know what the LV7/AWO engines were setup to run as, 6V or 24V, when sold to the British Military?

I am trying to decide on leaving the 6V system as is, convert back to the 24V as the M38 would have been, or convert to 12V.

Any thoughts or opinions would be greatly appreciated. I am assuming most would say to go back to the 24V, but that is pure speculation. I feel like if I could find solid information/documentation that the LV7/AWO engines were manufactured/sold/anticipated for 6V, sounds crazy, but I might just leave it 6V then.

Thank you.

Posted: **Thu May 30, 2019 9:30 am**

It comes down to personal preference as you deduced. The M38 as a Jeep was a 24V vehicle so putting it back that way makes it more like it was originally.

6V systems can have their own short coming, but lots give fine service. You say yours is already 6V? If operating and reliable no real hurry to change it right?

For one f my M38s I settled on a hybrid 24/12V system and so far Im getting great service out of it. It uses a 12V starter, coil, alternator and light bulbs. It also has a 12V to 24V convertor that operates the original gauges and horn. It can be put back to original by changing the bulbs, starter, alternator and coil to 24V and moving one wire from the convertor. With the hood closed there is nothing to give away what I have done to anyone looking the Jeep over, even with a fine tooth comb. But I have the reliability of modern easy to source parts (cheap) and I can get them at the corner car parts store.

Just one opinion.

Posted: **Thu May 30, 2019 9:39 am**

If you want to make it 12 volt, I have a 12 volt starter and generator that I took off mine. I am converting back to 24 volt. I can not vouch for function on parts as I just took them off and never ran them. The starter fits the early bellhousing.

Posted: **Thu May 30, 2019 12:16 pm**

I am not very familiar with the Background on the LV7 series L134's other than they are contract or license built for the British Commonwealth of Nations during or slightly after WWII. They may have been license built in Canada or England. They were never installed in an M38 by Willys. The casting design is mid 40's Willys IE casting 638632 which was WWII chain drive cam casting. They are almost identical. I would guess the engine is as mentioned above licensed built somewhere in the Commonwealth 40's or early 50's.

The M38 would hold significantly more resale value with a proper 641087 or 804380 Gear cam drive casting in it and of course equipped with 24 volt waterproof electrics.

Posted: **Thu May 30, 2019 12:51 pm**

I did a wee bit more research and found another suspect source for this LVC engine. Seems India had many reproduced in India after WWII for the many WWII left over British jeeps they inherited.

Found this auction listed on a G503 post about htese emgines:
http://www.pestcontrol.tendertiger.com/ ... 38.300%20K

The G503 post: https://forums.g503.com/viewtopic.php?t=121030

Tender Detail
Buyer/Seller : Can be viewed by Subscribers
Ref. Number : 17164109 Tender Number : 15-16/19017[113644] Tender Prod. No : 15-16/19017[113644]
Requirement : Auction Sale Of Lv7/Awo, 2805-000972, Eng Assy Jeep Willy (petrol) (eng No -pw 2304,Pw 2151,Pw 2310, Pv 2441,Pw 2139 & Pv 0911, 6 No, 1050.000 Kg, Lv7/Awo, 2805-000972, Eng Assy Jeep Willy (petrol) (eng No -pw 2002,Pw 2187,Pw 2017, Pv 2164,Pw 2176 & Pk 0003, 6 No, 1050.000 Kg, Lv7/Awo, 2805-000972, Eng Assy Jeep Willy (petrol) (eng No -pr 00279,Pl 1579,Pw 2322,Pw 2181 & Pw 2008, 5 No, 875.000 Kg, Lv7/Awo, 2805-000972, Eng Assy Jeep Willy (petrol) (eng No -pw 2014,Pw 2155,Pw 2107,Pw 2025 & Pw 2019, 5 No, 875.000 Kg, Lv7/Awo, 2805-000972, Eng Assy Jeep Willy (petrol) (eng No -pw 2766,Pw 1333,Pw2160,Pm 1704 & Pp 0008, 5 No, 875.000 Kg, Lv7/Awo, 2805-000972, Eng Assy Jeep Willy (petrol) (eng No -pw 2346,Pw 2054,Pw 2350,Pn 1713 & Pw 2032, 5 No, 875.000 Kg, Lv7/Awo, 2805-000972, Eng Assy Jeep Willy (petrol) (eng No -pw 2028,Pw2331,Pw 2134,Pw 2181 & Pk 0299, 5 No, 875.000 Kg, Lv6/Mt4, 6140-000004, Bsla 6v 12 Ah, 194 No, 505.000 Kg, Lv7/Man, V/51-26201-7004, Starter Motor Assy, 2 No, 38.300 Kg, Lv7/Man, 2520-000223, Double Universal Joint, 61 No, 721.700, Lv7/Man, 2520-000245, Journal Cross, 66 No, 80.000 Kg, Lv7/Man, 2910-000271, Injector Nozzle, 509 No, 26.000 Kg, Lv7/Man, 2520-000001, Gear Box Assy, 1 No, 99.000 Kg, Lv7/Man, 2530-000360, Brake Shoe Half Assy, 480 No, 1080.000 Kg, Lv7/Man, Ia-130202, Cover Water Proof Main, 1 No, 29.000 Kg, Lv7/Nsn, 17010-43812, Ac Fuel Pump, 47 No, 55.000 Kg, Lv7/Nsn, 2510-000213, Leaf Frt Spg No 1, 320 No, 1370.000 Kg, Lv7/Ml, H-3039779, Clutch Plate Assy, 19 No, 22.000 Kg, Lv7/Nsn, 2520-000461, Rod Spg Assy, 90 No, 1323.000 Kg, Lv7/Man, 2510-000066, Spring Assy Rear Left, 43 No, 3195.000 Kg, Lv7/Man, 2520-00191, Rear Drive Gear, 25 No, 100.000 Kg, Lv7/Man, 2815-000191, Filter Suction, 30 No, 16.000 Kg, Lv7/Man, 2520-000091, Helical Gear 41 Teeth, 78 No, 248.000 Kg, Lv7/Man, 2815-000191, Filter Suction, 19 No, 10.000 Kg, Lv7/Man, 51-09901-0001, Gasket, 24 No, 1.000 Kg, Lv7/Man, 2520-000172, Seal For Joint, 1 No, 0.500 Kg, Lv7/Man, Tp-279-3, Rubber Pad, 12 No, 4.000 Kg, Lv7/Man, Wl-62, Adapter For Mounting Conpression, 2 No, 0.500 Kg, Seal, Etc, Lv7/Man, 2520-000228, Streering Knuckle Right, 17 No, 237.000 Kg, Lv7/Man, 2510-000055, Assy Front Spring, 92 No, 4770.000 Kg, Lv7/Man, 4320-000422, Water Pump Centrifungal, 153 No, 850.000 Kg, Rubber Seal, Etc, Leaf No 1 Front Spg, Etc, , Left Front Spring No 02, Etc, Lv7/Man, 2520-000334, Upper Clutch Lever, 114 No, 19.000 Kg, Lv7/Man, 2910-001869, Plunger & Barrel Full Oil Pump, 517 No, 28.000 Kg, Lv7/Man, 2930-000012, Shaft Pump Impure, 742 No, 593.000 Kg, Lv7nsn, 4320-000423, Oil Pump Assy, 72 No, 180.000 Kg, Stud 3/16,Etc, Hose Ventilation Tube, Etc, Washer Spring, Etc, Gasket,Etc, Nut Hex,Etc, Shaft Frt Axle, Etc, Ce Bracket, Etc, Thermostate Ctr Show, Etc, Gauge Accple Reget, Etc, Lv7/Tmb, 312-260-51000, Gear Box Assy, Nos, 1 No, 64.500 Kg, Lv7/Tmb, 2815-000747, Valve Spg Retainer, Nos, 2150 No, 54.000 Kg, Lv7/Man, 2910-001867, Fip, Nos, 3 No, 44.500 Kg, Lv7/Tmb, 430-240-0009, Nozzle Holder, Nos, 20 No, 7.000 Kg, Lv7/Tmb, 2573-2510-0108, Assy Clutch Plate, Nos, 154 No, 592.000 Kg, Lv7/Tmb, 042-320-0002t, Front Spg 12 Leaf, Nos, 1 No, 56.500 Kg, Lv7/Tmb, 2510-000782, Spg Assy, Nos, 233 No, 2274.500 Kg, Lv7/Tmb, 2920-000159, Starter Motor, Nos, 3 No, 31.000 Kg, Oil Bath Air Cleaner, Etc, Lv7/Man, 2990-000001, Pipe Exhaust, 499 No, 1746.000 Kg, Lv7/Man, 3020-000568, Main Shaft, 51 No, 306.000 Kg, Lv7/Man, 4720-002761, Lock Of Hose, 35 No, 5.000 Kg, Lv7/Man, 2520-000305, Coil Pump Assy, 18 No, 28.500 Kg, Lv7/Man, 2520-000085, Driving Shaft, 48 No, 139.000 Kg, Lv7/Man, 2520-000223, Double Universal Joint, 8 No, 96.000 Kg, Lv7/Man, 2815-000061, Cyl Head Assy, 3 No, 53.500 Kg, Lv7/Man, 2520-000345, Shaft Intermediate, 22 No, 114.500 Kg, Lv7/Man, 2520-000089, Shaft Interm, 10 No, 52.000 Kg, Lv7/Man, 2520-000098, Main Shaft, 188 No, 1128.000 Kg, Lv7/Man, 2520-000268, Connecting , 36 No, 140.000 Kg, Lv7/Man, 2530-003182, Tie Rod Assy, 49 No, 254.500 Kg, Nipple Grease, Etc, Nut Fixing Stud, Etc.
Key Values
Closing Date : 7/03/2016
Location : Himachal Pradesh - India

Posted: **Fri May 31, 2019 5:02 am**

I'll have to check to confirm, but I have a 6v MARKED (NATO style) dist on a wartime block in a PE genset...rebuilt by the French...

willysmjeeps.com

1951 M38 with Engine BLOCK ASSY LV7/AWO A6793

1951 M38 with Engine BLOCK ASSY LV7/AWO A6793