M38 Folder soft door frames - where to find
Posted: Sun Jun 23, 2019 4:51 pm
Where is a good source for good M38 soft door frames? I am wondering if the M38-A1 frames will fit or not? Has anyone fabbed a set? Looking for ideas
willysmjeeps.com
Willys Military Jeep Forum
https://willysmjeeps.com/
M38 Folder soft door frames - where to find
Page 1 of 1
Posted: Sun Jun 23, 2019 5:57 pm
Where are you located? Shipping can make them expensive.
Posted: Sun Jun 23, 2019 6:37 pm
The folding frames don’t take up much space, I shipped some to Idaho? I think?! It wasn’t bad.
On the other hand if you buy the escutcheon plates and handles they aren’t difficult to build. You just need good dimensions.
Of course you have a great start. The top and bottom rod holes in the windshield frame and door opening!
On the other hand if you buy the escutcheon plates and handles they aren’t difficult to build. You just need good dimensions.
Of course you have a great start. The top and bottom rod holes in the windshield frame and door opening!
Posted: Sun Jun 23, 2019 8:40 pm
mdainsd I am in central illinois
Posted: Mon Jun 24, 2019 1:08 am
Have you perused my mjeeps album for canvas tops?
http://www.willysmjeeps.com/v2/modules. ... _album.php
If you get the rods and bows installed and you have your windshield hinge bracket and the cowl sides canvas grip strip it should be fairly easy to fabricate a pair of doors.
http://www.willysmjeeps.com/v2/modules. ... _album.php
If you get the rods and bows installed and you have your windshield hinge bracket and the cowl sides canvas grip strip it should be fairly easy to fabricate a pair of doors.
Posted: Mon Jun 24, 2019 5:57 am
Midwest Military has folding and non folding M38 door frames.
John
John
Posted: Thu Jun 27, 2019 8:05 pm
Mine came from midwest military ,original and one still had the canvas. The other side had been resigned but very satisfied.