Page 1 of 1
M38 engine battery box removal.
Posted: Thu Apr 07, 2022 10:02 am
by arisLgr
How can I remove the engine bay battery box? I see there is a frame underneath it, that is fixed onto the chassis with welding and rivets.
Inside my box there is another kind of frame to fit the battery on it I presume, but it seems either stuck or welded in the box and I cant remove it.
Thanks
Aris
Posted: Thu Apr 07, 2022 12:37 pm
by wesk
These should help:
Posted: Thu Apr 07, 2022 1:50 pm
by keats
if unmodified, that inner base inside the battery box is a tight fit, but not welded, or bolted in. the j-hooks pass through it to hold the battery and box down to the frame tray.
the link below shows the parts of the box assembly. the base inside the box is the black item top right
https://www.kaiserwillys.com/us-made-ne ... gKzi_D_BwE
Posted: Thu Apr 07, 2022 9:50 pm
by wesk
Move Aris' post from another topic to here where it was meant to go!
arisLgr
PostPosted: Thu Apr 07, 2022 12:55 pm Post subject:
OK, after some searching I out there is the TRAY welded on the chassis and then the BOX goes on top of it. I also found a picture showing there are IN the box more items in it, like the base for the battery etc. My question how can I remove that base, as it is tottaly rusted in place, is it bolted in there or what?
Aris
Willys M38
1936 Cord Phaeton
1954 Mercury Monterey
1968 Corvette Stingray
1973 Mercedes 350SE
1974 Montesa Cota 247T
1982 Kubota B7100
Posted: Fri Apr 08, 2022 10:07 am
by arisLgr
Done, all out, the detailed pictures helped as all the innards were 'cemented' in there probably since the Korean war! Thank you all!