willysmjeeps.com

One of our member's erroneously sent this as an email to our Admin email:

M38A1 Tub Mounting Points


Is there any information available for the correct tub mounting locations on a 1953 M38A1 Jeep?<div><br /></div>



lvrnespeca

Your best source of info is your Body and Running Gear Service manual TM 9-8015-2. First it offers guidance on trueing up your frame just in case it has a bending. Then in combination with your Main Operator's Handbook TM 9-8014 and your parts manual ORD 9 SNL G-758 the answers you seek are in these pubs.

Another good source is my Photo Album: http://www.willysmjeeps.com/v2/modules. ... _album.php

In particular there is my M38A1 Frame Sub-Album: http://www.willysmjeeps.com/v2/modules. ... _album.php



Larger file size is at: http://willysmjeeps.com/v2/modules/gall ... _Frame.jpg



As I mentioned above this is a good time to make sure the frame is squared up true.

Here's another good shot:


Hope this helps and gets you on the right path.

Nice explanation!