Page 1 of 1
Canvas Top - Securing
Posted: Thu Feb 22, 2007 7:46 pm
by Bob_C
Quick question. Got my canvas top installed, but curious as to how the top is secured to the back panel on the M38A1. There seems to be 1 extra strap to either side. I'm also bad with knots / straps / etc. Anyone have an illustration or explination how these get secured? I think I have an idea, but it isnt *that* taught. How taught is it supposed to be?
Another question, are the rods only for the sides?
Thanks!
Posted: Thu Feb 22, 2007 10:54 pm
by wesk
I think the rod work is well depicted by the weebee guys here:
Posted: Fri Feb 23, 2007 3:41 am
by usma41
Wes, I'll have to take a look but I think the M38 has four side straps. If so I think this guy may have a side panel for a M38 and trying to put it on an A1. This may be where he is ending up with an extra strap.
Posted: Fri Feb 23, 2007 3:48 am
by usma41
I was wrong the M38 only has three side straps.
Posted: Fri Feb 23, 2007 9:07 am
by wesk
He has an M38A1 and it's the rear panel starps he is questioning.
Posted: Fri Feb 23, 2007 1:50 pm
by Bob_C
Thanks Wes,
Reason I asked was the my repro bows didnt have a hole drilled for the horizontal rod. I guess I will have to do that, drats. Ive seen that weebee image before, but I couldnt see how it exactly secured, or if the rod was simply held temporarily in place to be recieved by some part of the side curtins (which I dont have).
And I think Im gonna go shoot something...if I remember correctly, I welded up those holes for the footman loops on the corner.
Thought they were part of the 10 zillion holes the previous owner drilled into the body. Gah. bloody hoot.
Posted: Fri Feb 23, 2007 2:29 pm
by wesk
The two rods are enclosed in the flaps of the top and the side curtain.
The top rod shown here would actually be inside the top 's side flap.
Posted: Sat Feb 24, 2007 8:44 am
by Bob_C
Do you know what diameter hole / how far up it needs to be up the bows?
Posted: Sat Feb 24, 2007 9:46 am
by wesk
No I don't have a bow set here. The A1 and M38 bows are the same so someone must have a set handy.
Posted: Sat Feb 24, 2007 10:28 pm
by davistroy
Where do the rods get stored when the top is off?
For that matter, where do the side curtains and doors get stored when the top is off?
Posted: Sat Feb 24, 2007 11:08 pm
by wesk
They're tucked inside the folded canvas and the folded canvas is tied down on top of the rear wheel houses.
Posted: Sun Feb 25, 2007 6:45 am
by BobW
loopbackzero wrote:Do you know what diameter hole / how far up it needs to be up the bows?
The hole in my NOS bow is 26" up from the bottom edge of the front bow.