willysmjeeps.com

As the handle is missing and I cant find one, I decided to fabricate it for my M38.

I estimated that the steel tube used is 5/8 " outside dia. Someone please confirm this and also provide the following measurements,

Approx wall thickness of tube.
Total length of tube with out handle included
Holes dia for cable end
Approx size of a tooth
Total length of teeth area
Length of free area on both ends



Thanks in advance.

sent you a pm with info

/N

Thanks a lot. I got it.

I hope its what you where looking for

or at least a push in the right direction.

let me know if you need any more info.

/N