I want do rebuild my bellcrank assembly but there is a problem: When everything is mounted and tightened, there is a space between the bellcrank and the bracket on the frame.Is that normal?
Thanks
Gillinski from Luxembourg (m38a1)
Steering: bellcrank problem
Moderators: TomM, Moderator, wesk
-
Gillinski
- Member
- Posts: 8
- Joined: Thu Jan 04, 2007 6:00 pm
- Location: Luxembourg, Europe
-
wesk
- Site Administrator
- Posts: 16413
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
Starting at the bottom of the vertical pin there should be a washer, a seal a bearing, a spacer, a bearing, a seal and then the pinch clamp The two bearings and the spacer will be hidden in the bellcrank.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php