there has been a lot of previous discussion on venting the dist,by venting through the fuel pump vaccum lines, my m/38 has the 24v dist, that is pluged off top and bottom. i dont have the military fuel pump. is there another way that i could get some cooling to the distributor.my m/38 has electric wipers. it all came that way. thanks to all
newton
venting distributor
Moderators: TomM, Moderator, wesk
-
wesk
- Site Administrator
- Posts: 16413
- Joined: Sun Apr 03, 2005 6:00 pm
- Location: Wisconsin
- Contact:
Newton,
You could just connect a 1/8" tube to the intake with a soldered shut brass fitting adapter thru which you then drill a .040 hole and connect to one side of the distributor then connect an unobstructed 1/8" tube to the air intake at the crossover or the air filter. You really should maintain a vented distributor.
You could just connect a 1/8" tube to the intake with a soldered shut brass fitting adapter thru which you then drill a .040 hole and connect to one side of the distributor then connect an unobstructed 1/8" tube to the air intake at the crossover or the air filter. You really should maintain a vented distributor.
Wes K
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php
45 MB, 51 M38, 54 M37, 66 M101A1, 60 CJ5, 76 DJ5D, 47Bantam T3-C & 5? M100
Mjeeps photo album: http://www.willysmjeeps.com/v2/modules. ... _album.php