M-38CDN Data Plate Source...
Posted: Thu Jul 05, 2007 8:39 am
Anyone needing a new set of data plates for their M-38CDN contact Brian Asbury PO Box 26, Milton, Ontario, Canada L9T 2Y3 Tel (519) 853-1738.
I bought a new set of reproduction plates from him at the MVPA convention and they are the proper etched brass and look fantastic... the only thing wrong for the purests is the Inspection stamp is etched and not stamped...
Contact Brian for more info...
Hope this helps...
I bought a new set of reproduction plates from him at the MVPA convention and they are the proper etched brass and look fantastic... the only thing wrong for the purests is the Inspection stamp is etched and not stamped...
Contact Brian for more info...
Hope this helps...