willysmjeeps.com

YEP ,, Took this off today..This is the first of this kind I EVER seen...


http://photobucket.com/albums/d137/hillbilly21/


I put this on here so its easier to see instead of going through my photos..What I am looking for is what the heck do I do with this now ??Does anybody have any info or why its on my 24 volt system that is complete on this jeep..I cant find a converter or inverter anywhere !!

WES ???? Your the Man here !!!

Could it be the same as a 24volt, just with a 6volt tag...

I bet it is...

Hope this helps...

The 6 volt IBC-4015-UT distributor is virtually identicle to the most commonly used 24 volt IAU-4006-UT M38 distributor. The only significant differences are the data plates and the coil. It is not uncommon to see your situation where an original CJV35 or generator set waterproof 6 volt distributor is presed into service as a 24 volt unit by swapping the coil.

You can ID coils by part number or by measuring primary resistance. It is 1.20 - 1.35 for the 6 volt coil and 6.2 - 6.5 for the 24 volt coil.