Page 1 of 1
transfer case leak
Posted: Fri Jul 20, 2007 10:41 pm
by oreo3156
I developed a transfer case leak on my A1. It is coming out where the plungers come out of the front of the case to shift it into high/low and 4wd/2wd. Appears to be both places. Any advice?
Posted: Sat Jul 21, 2007 7:20 am
by wesk
You can pull that front shift case off with the unit still on the jeep and install new ORD# 500007 garloc seals (N). You'll have to support the transfer's right side and raise it slightly, pull the shift levers, front drive shaft, front drive yoke (K, J & H) and out she comes. Probably help to loose the shift detent balls (P, Q, R & S).
