willysmjeeps.com

Hi all,

I need the hole locations of the shock absorber rivit holes, and any holes on the rear bumper. I definitally need the diameter's of the rivet holes, but the diameters of the holes on the rear bumper would be good too.

This is what my shock mounts used to look like.


Bubba was definitally here, and I don't trust his measuring techniques and would rather not use the ones he had.

Sorry for the sloppy lingo.

As for the actual mounts, they are not missing. Just the metal that they were bolted to had been cut and welded, and I dont trust bubba's craftmanship here.

The rear bumper, or cross member, whatever you want to call it, was also dented up pretty bad and looked like it had been tampered with, so I cut out the majority of it and welded a new piece of bent plate in.

This is what I am talking about.

I will try to get your info later today...

My M100 was not butchered in those areas...

Bob,

I hope this is what you need...





Hope this helps...

Hal, you are da man! Thanks!