Page 1 of 1
M38 windshield glass
Posted: Thu Sep 27, 2007 3:59 pm
by cknight
What is the height and width of the glass for the M38?
Posted: Thu Sep 27, 2007 7:49 pm
by OKCM38CDN
Go to a good glass dealer an tell them you need a piece of glas for a CJ3 and they can cut one to fit... It cost me $100 for piece of clear glass to be cut and installed ... well worth the headache unless you do this often enough. I don't...
Hope this helps...
Posted: Thu Sep 27, 2007 10:55 pm
by wesk
48 51/64 x 12 31/32 x 1/4"
Windshield Glass
Posted: Sun Sep 30, 2007 11:32 am
by gamillerman
If you want I can provide you a template for the glass. I have an original glass taken out and provided another member with a template and it worked out fine
Posted: Mon Oct 01, 2007 8:45 am
by cknight
Thanks for the offer. I have a glass for and m38a1 which should give the the corner radius and along with the height and width i should be able to get it.
After I get the last coat of paint on the frame I am going to take it to the gglass shop along the the gasket