Still Need Frame Info 53 M38 CDN

boucher · Post by **boucher** » Sun Oct 28, 2007 7:06 am

Anyone know the dimensions for the frame part that the brake return spring attaches (height/shape/size of hole/etc...) ???
I welded a piece on but need to shape it to the correct dimensions.

Thanks, Peter (Ottawa)

Post by **Ryan_Miller** » Tue Nov 06, 2007 7:31 pm

Anyone have this info?

Can you get these new?

remi_emond · Post by **remi_emond** » Tue Nov 13, 2007 10:41 am

is it the brake return spring bracket or the engine stay cable bracket?
Remi
St-Nicolas, QC

Post by **wesk** » Tue Nov 13, 2007 1:10 pm

Post by **Ryan_Miller** » Tue Nov 13, 2007 4:36 pm

I think you can get those new from some of the jeep parts suppliers can't you?

boucher · Post by **boucher** » Mon Nov 19, 2007 7:52 am

Thanks for the info.

Now that I know it's for the engine stay cable, does anyone know where the other end of the cable attaches?

Thanks ,

Peter (Ottawa)

remi_emond · Post by **remi_emond** » Mon Nov 19, 2007 8:19 am

it attache to the lower left of transmission bell housing.
Remi

Post by **wesk** » Mon Nov 19, 2007 9:31 am

The front end of the stay cable is actually a bolt and threads thru the left lower bolt hole of the bell.

It's the really long set of threads in the upper right of this photo