Page 1 of 1
STRAPS SET UP
Posted: Fri Nov 09, 2007 4:37 pm
by lajhune
hi to all! i have just recieved the complete set of straps ordered from midwest. i am familiar with the windshield, axe & shovel straps but can anyone please tell me (or photos would be a great help) how to set-up:
1. 4 pcs top stow straps
2. 2 pcs gas can strap(with 10 sets of quick rivets & 10 sets of tubular rivets)
3. 2 pcs bow stowage straps
thanks, thanks, thanks in advanced!
photos in thesame order:
Posted: Fri Nov 09, 2007 5:13 pm
by OKCM38CDN
The 4 straps for the top mount under the footman loops on the rear wheel wells... the inner ones... There should be loops in the straps that the footman loops go thru... You have to take the footman loops off feed it thru the loop in the strap and then put the footman loop back on...
The 2 straps for the bow storage just feed thru the rear bow storage brackets thru the slot, then around the bows...
Sorry I do not know about the jerry can strap as I have a one piece strap on mine that came with it...
Hope this helps...
If you need photos I can get them in the morning when I take the jeep out for a spin...
Posted: Fri Nov 09, 2007 5:31 pm
by lajhune
OKCM38CDN wrote:The 4 straps for the top mount under the footman loops on the rear wheel wells... the inner ones... There should be loops in the straps that the footman loops go thru... You have to take the footman loops off feed it thru the loop in the strap and then put the footman loop back on...
The 2 straps for the bow storage just feed thru the rear bow storage brackets thru the slot, then around the bows...
Sorry I do not know about the jerry can strap as I have a one piece strap on mine that came with it...
Hope this helps...
If you need photos I can get them in the morning when I take the jeep out for a spin...
thanks for the infos and il wait for the photos.
hope someone will guide me with the jerry can strap and its rivets...
Posted: Wed Nov 14, 2007 6:27 pm
by Jim
I appreciate the comment on the loop in the straps going
through the footman loops! I'd wondered what those were
for. Whilst re-doing those, I found two additional footman
loops (on our M38) just inboard of the bow thingies on
the rear of the tub. Are those for the bow retaining straps?
Jim in Darkest Arkansas GO DUCKS!
Posted: Wed Nov 14, 2007 9:59 pm
by Seymour
You're a long way from Autzen Stadium, Jim!
Quack!
straps set up
Posted: Thu Nov 15, 2007 8:53 am
by lajhune
can anyone, please post photos of ALL the standard strappings in your M38.
again, thanks......