willysmjeeps.com

Hope a few of you more fortunate souls with the Ramsey 50 can help us less fortunate souls by helping me put together a good set of drawings to facilitate modifying civvy winches to fit the m38/m38A1 mount.

Would all who are willing fill in the blanks for me or just list the drawing dimension letter with what you measured.

Wes,

Did anyone respond to this post? Even a few of the measurements would de-mystify the process of me making one of these. If you would share what was provided to you, that would be great for the site.

Thanks,
jonesal

You can enter this link for a large copy:
http://img.mypicgallery.com/winchesptos ... 1-page.jpg

Keith Buckley supplied this original Willys blue print.

I will see what I can do, but I am not very good at taking measurements.