Head bolts...
Posted: Sun Mar 16, 2008 4:28 am
I am in need of the three longer head bolts that hold the engine lifting loops on for the head...or the size and length of them...Thanks in advance..
You should have studs, not bolts.
There are 12 short that the majority used 7/16 - 14 NC x 7/16 - 20 NF - 2 x 3 7/16. The engines between serial MC10169 and MC22765 used a 3 3/8" long stud.
There are 3 long studs 7/16 - 14 NC (5/8) x 7/16 - 20 NF (1 3/16) x3 7/8.
(5/8)" is the length of the coarse threads and (1 3/16)" is the length of the fine threads. The 3 7/8" is the overall length of the stud.