Page 1 of 1
L-134 radiator housing question.
Posted: Thu Aug 07, 2008 9:38 pm
by m38a1chuck
I have an L-134 and the thermostat is loose. It seems to be turning sideways inside the housing. Someone mentioned an additional pipe or bracket is needed to support it.
this is inside the housing on top the L head.
Any info welcome,
thanks
Posted: Fri Aug 08, 2008 8:54 am
by OKCM38CDN
There supposed to be a mount inside the housing that the thermostat sets on. you can get one from the vendors.
It looks like a sheet metal piece of pipe that is flaired inwards to hold the thermostat.
Hope this helps...
Posted: Sun Aug 10, 2008 10:09 am
by m38a1chuck
ok... a Thermostat Retainer,
http://www.jeepdoc.com/catalog/partframe.asp?id=4943
Thanks,
Chuck
OKCM38CDN wrote:There supposed to be a mount inside the housing that the thermostat sets on. you can get one from the vendors.
It looks like a sheet metal piece of pipe that is flaired inwards to hold the thermostat.
Hope this helps...
Posted: Sun Aug 10, 2008 10:42 am
by OKCM38CDN
That is it...