Page 1 of 1
Spacers for gas can holder
Posted: Fri Jun 10, 2005 9:55 am
by Cacti_Ken
What are the deminsions for the Gas can bracket/holder spacers? I would like to make me some. Also what diameter is the bolt that is used to hold it on with?
Posted: Fri Jun 10, 2005 7:44 pm
by OKCM38CDN
These spacers are 1" diameter stock and are 5/8" long. I believe they are held on with 5/16" bolts.
I made a set, if you have a power hacksaw it is much easier...
Hope This helps...
Posted: Sat Jun 11, 2005 6:04 am
by Cacti_Ken
Thanks, that helps a lot. The holes in my can holder are close to a 1/2". Seems to me a bolt larger than 5/16" should be used.
Posted: Thu Jun 23, 2005 6:56 am
by Saad
Hi Guys,
Wanted to know, what shape these spacers are and where do they fit? I suppose between the tailgate and gas can bracket?
Thanks
Posted: Thu Jun 23, 2005 7:19 am
by GregS
Saad,
Great to see you make it to the new site. Glad to see you are still with your project.
I borrowed this imagine from the Midwest Military website. Yes they do go between the tailgate and jerry can holder.
Greg
Posted: Thu Jul 07, 2005 10:31 am
by Saad
Thanks Greg,
These are missing on my M38 and I had no idea that there goes spacers between holder and tailgate. Although, the jerry can seems to be binding with tailgate..
Jeeps is running for last 8 months. Things getting smoother. Many details pending. Pace of work slower.
Saad