Page 1 of 1
Vent Line Clps
Posted: Fri Sep 26, 2008 5:47 pm
by Ryan_Miller
Does anyone have a source for vent line clips that look similar to the original?

Posted: Fri Sep 26, 2008 6:15 pm
by OKCM38CDN
You might try Restoration Specialties... they carry lots of oddball stuff
Posted: Fri Sep 26, 2008 7:59 pm
by Ryan_Miller
Hal,
The photo in thier catalog looked right, but when I got them in the mail the ends where the tube runs are turned up and it looks obviously wrong.
I know some of you think I am crazy, but it is a little hobby of mine to try and find original stuff or reproduction stuff that looks and functions just like OEM.
Hey, I admit that I am crazy, that is the first step right?

Posted: Sat Sep 27, 2008 12:15 am
by wesk
The AN742-X series clamps look just like it. The dash number represents 1/16" so a -2 is for 1/8" tube and a -5 is for 5/16" tube and so on. Aviation hardware sources carry them.
http://www.wicksaircraft.com/catalog/pr ... h=YW43NDI=

Posted: Sat Sep 27, 2008 2:09 am
by whydahdvr
Ryan and all,
I was looking at the picture and I'm sure that Wes has a better suggestion. However, the metal looks like copper. I think I saw copper brackets and things like what you're looking for at Home Depot (or something similar) in the electrical department. Might be worth a look.
Posted: Sat Sep 27, 2008 8:30 am
by Ryan_Miller
Hey,
That color is rust and in the picture it does look like copper. I guess it is a photo artifact.
I will have to look again at Lowe's and Home Depot