Page 1 of 1
Mashed Head Gasket
Posted: Mon Oct 20, 2008 8:54 pm
by Scott21
I have no idea how someong could do this when putting a motor together....well can guess. I tried to get the image on my album.
Scott
Posted: Tue Oct 21, 2008 11:28 am
by wesk
That gasket may not have been damaged during assembly. It may well have resulted from a warping of the head or loosening of the head bolts later that may have blown it out. It's appearance certainly resembles a lot of blown gaskets I have seen in the past.
Posted: Tue Oct 21, 2008 1:37 pm
by Scott21
Wes
I am thinking the timing issue might be the cause.
Scott