Page 1 of 1
M38 windshield blocks
Posted: Tue Dec 23, 2008 7:41 pm
by shack
Hey Guys,
What are the dimensions of the M38 windshield hood blocks
Thanks again!
Joel
Posted: Tue Dec 23, 2008 9:48 pm
by Ryan_Miller
1 inch X 4 inches X 1 13/16 inches (or 1 3/4 inches)
White oak, painted OD 2430
Posted: Tue Dec 23, 2008 11:23 pm
by shack
Thanks Ryan,
How far from the edge of the hood should they go? Seems that if you center the bolt holes with the 4" block, the top channel barely hits the block.
Regards, Joel
Posted: Wed Dec 24, 2008 9:18 am
by wesk
Knowing the block dimensions you can determine the distance from the front edge of the hood.