Page 1 of 1
New TM additions to downloads section
Posted: Fri Apr 10, 2009 4:25 pm
by Ryan_Miller
Cody Augustine dontated some more TM manuals in a downloadable format. I put the on the downloads section under M38 and M38A1
They are
TM 9-238 deep water fording
TM 9-1829 speedometers
TM 9-1828A Fuel Pumps
TM 9-1827C Brake, Lockheed Wagner
http://www.willysmjeeps.com/v2/modules. ... oad&cid=39
Posted: Fri Apr 10, 2009 8:12 pm
by wesk
Thanks Cody!
Posted: Fri Apr 10, 2009 8:28 pm
by Ryan_Miller
Just got two more from Cody:
TM 9-2320-208-20P ORG PARTS TOOLS M38A1 M38A1C M170
And
TM 9-2320-208-34P DS GS PARTS M38A1 M38A1C M170
Same web address here on our downloads section as posted above
Posted: Fri Apr 10, 2009 8:32 pm
by wesk
Now there's a hard to find parts Manual for the M38A1. The -34P replaced the ORD 9 and the -20 replaced the ORD 8.
Posted: Fri Apr 10, 2009 10:53 pm
by wesk
Link doesn't work on Chg 7 to 8015-2
Posted: Sat Apr 11, 2009 7:20 am
by Ryan_Miller
Wes,
I just opened here at work. It downloads slow.
Posted: Sat Apr 11, 2009 8:08 am
by Ryan_Miller
Hey,
I opened the wrong one: it is the 8014 change 7. I fix it tonight when I get off work.
Posted: Sat Apr 11, 2009 12:00 pm
by Ryan_Miller
Hey,
I got it fixed over lunch. I checked it and it downloads.
Posted: Mon Apr 13, 2009 1:57 pm
by fra587
Looked around but couldn't find a place to input this. The data plate from my M38A1 is"weak but readable" , looks like MD 62657, title says VIN 806279W1C 1953 M38A1. Seller says it spent most of its life at Ft Campbell. KY. When I signed up, there was a reminder to provide some data on the Jeep, but I waited until I got the old data plate. Mine has a new plate with nothing on it. Does anyone have the numbers stamped/engraved on the new plates? Thanks for all the work you guys do !!!. Frank//fra587
Posted: Mon Apr 13, 2009 7:53 pm
by wesk
Hello Frank,
Thanks for the data. I find it interesting what was used for the VIN on the title. Years ago most cars were titled using the engine serial number. That number on your title is the M38A1 engine casting number which is found on the right side of the block down near the oil pan on about 100,000 M38A1 engines. That is an error you should try to correct. The VIN should be either MD62657 or the engine's serial number which is up on that small flat above the water pump. Right now your VIN probably matches about 1000 currently registered M38A1's.
Engine's serial number location.
This is where you'll find the patent plate behind the passenger seat. It should match the dash serial plate number.