Page 1 of 1
sector shaft
Posted: Mon Apr 20, 2009 1:45 am
by maeserik
Is the sectorshaft in the steeringbox on a CJ3a and a M38 the same ?
thanks
Erik
Posted: Mon Apr 20, 2009 10:21 am
by wesk
Not sure.
3A steering gear PN 647694
3A Shaft & lever assy PN A-745
Ratio 14-12-14 to 1
Early M38 steering gear PN 801691
Early M38 shaft & lever PN 801715
Ratio 15.4-13.5-15.4 to 1
Late M38 steering gear PN 804384
Late M38 Shaft & lever PN 804534
Ratio 15.4-13.5-15.4 to 1
This data appears to say no.
Posted: Tue Apr 21, 2009 12:06 am
by maeserik
thanks Wes, next winter i want to replace the sectorshaft in my steeringbox together with the bushings, not replaced during the rest a few years ago, and i miss the zero play spot in the middle, propably the two pens on the sector shaft are worn out. Tje heep steers fine, but i want to go for zero play in the steering. Our GPW has zero playing, the steeringbox has also a new sectorshaft together with new bushings.
First i have to see if i have a early or late steering box, i know there is some info on this forum here.
Erik