Page 1 of 1

M38A1 tub pics

Posted: Tue Apr 28, 2009 11:20 pm
by PaulK
Hi Guys,

I want to put a full top on my M38A1. Does anyone know if there are 3 footman loops that go on the tub to hold the side curtains down?
Any pics of the sides of the tub with all attachment points for the top would be of help. I am putting doors on also and any pics of the hardware attachment points would be of help especially where the windshield frame is involved. Thanks.

Regards,

Paul

Posted: Wed Apr 29, 2009 11:04 am
by wesk
Image
Note the row of footman loops on the small ledge about 1" down from top edge.

Image
Back row.

Image
Here you can see the top third of the doors upper cahnnel and the door's upper hinge bracket is the tubular bracket held on with two bolts about an inch below the top of the channel.

Image
Here's a very good view overall.

Posted: Wed Apr 29, 2009 10:04 pm
by PaulK
Thanks Wes for the pics. Wes is the door upper channel bolted or welded on? Thanks again.

Paul