Hi beam switch rebuild
Posted: Mon Jun 29, 2009 7:16 pm
has anyone attempted to rebuild these units, any thoughts and pics to share? 
Page 1 of 1
Posted: Tue Jun 30, 2009 1:53 am
contact cacti_ken, also on, this forum i thinck he has rebuild the switch, seen in his Photo Gallery.
Posted: Tue Jun 30, 2009 8:20 am
the pic you mentioned in cacti-ken's gallery is for a service "MAIN" light switch, my query is directed towards rebuild of a "Hi-Beam" switch 
Posted: Thu Jul 02, 2009 8:14 am
sorry, can't help
i use one new repro for a mb jeep, and made little wires with douglasconnetors on the switch to connect with the original wires
The switch is invissible so i did not mind the originality. The same with the brakelightswitch.
i use one new repro for a mb jeep, and made little wires with douglasconnetors on the switch to connect with the original wires
The switch is invissible so i did not mind the originality. The same with the brakelightswitch.
Posted: Thu Jul 02, 2009 8:35 am
I didn't take any photos, but I did try to take it a part (the high beam switch) I tore it up trying to do so. I chunked it and bought a new one.
Posted: Thu Jul 02, 2009 9:55 am
got 3 with rotted wires, what a waste.
Posted: Thu Jul 02, 2009 12:28 pm
Try it anyway. What can you loose?
Posted: Fri Jul 03, 2009 8:36 am
