willysmjeeps.com

I want to make sure I put my pistons and main bearings back correctly. I saw the marks and thought they were self explanatory but too much time lapsed so I thought I would humble myself and ask ---- My rods are marked with 1-4 which is on the same side as the T-slot on the piston. Do these go on the cam side?

Also, the 2 crankshaft bearings have a notch on them. One has 1 notch and one has 2 notches. Does the 1 notch go to the cam gear and the 2 notch go in the middle?

Thanks,