slotted plate on tailgate

Cacti_Ken · Post by **Cacti_Ken** » Mon Aug 08, 2005 10:56 pm

Does the M38 tailgate suppose to have a slotted plate attached to it for the jerry can strap? If so where might I find one?

OKCM38CDN · Post by **OKCM38CDN** » Tue Aug 09, 2005 3:46 pm

My M-38 CDN does... You probably could make one out of stock material...

Where the strap attaches to the tailgate... not a great picture but that is where it goes.

Hope This Helps...

GregS · Post by **GregS** » Tue Aug 09, 2005 7:45 pm

Ken,

This is a good photo Pat Newman sent me once. I have a couple more if needed.

Greg

Cacti_Ken · Post by **Cacti_Ken** » Wed Aug 10, 2005 8:22 pm

Thanks guys, I'll see if I can make something that will work. It's hard to tell what the dimentions are from the photo, but maybe it will work out.

GregS · Post by **GregS** » Thu Aug 11, 2005 7:36 am

Well, if you have a strap you can see the slot is just slightly bigger than the strap and the metal on each side of the slot is about 1/4".