Page 1 of 1
Will this generator work on a m38 ?
Posted: Fri Sep 18, 2009 7:21 pm
by brimac
This came with my jeep in the bottom of a 5 gallon bucket.
A quick look and it seems that the bottom mounts are spaced
too wide.
7 1/4 distance
Posted: Fri Sep 18, 2009 7:39 pm
by brimac
Just put the rubber bushing in the front plate and
Now I know why the 12 volt conversion stopped and the jeep
sat for 25years. Maybe I can make a spacer, I dont want to put on
a new front plate.
Posted: Fri Sep 18, 2009 9:43 pm
by wesk
Yes the generator will fit.
You could weld a steel bushing to replace the forward 1/4" of bushing you are missing.
Posted: Sat Sep 19, 2009 5:20 pm
by brimac
Thank you for the scan , time to look in the scrap pile for some
tube or pipe.
Brian