Can we start a bubba mods sticky thread?

53a1 · Post by **53a1** » Tue Oct 20, 2009 3:12 pm

When reading this thread my project came to mind.

http://www.willysmjeeps.com/v2/modules. ... highlight=

53a1 · Post by **53a1** » Thu Oct 22, 2009 3:39 pm

I guess the answer is NO

C'mon 80 views and no support? Not even you linx?

Post by **Ryan_Miller** » Thu Oct 22, 2009 7:13 pm

Hey,

I don't see a problem with a "buba mods" sticky.

I will change your thread to one tonight.

53a1 · Post by **53a1** » Fri Oct 23, 2009 1:53 pm

Thanks!

mikes47jeep · Post by **mikes47jeep** » Fri Oct 23, 2009 11:25 pm

i have had too bad of a run in with bubba

however

my cj2a must have been owned by a bondo master because the whole passengers side was bondo and misc tin pieces (traffic signs, license plates, flattened tin cans)
oh and the GM 12 alternator conversion

the M38a1 is relitvely unmolested it just has a 12V generator and 12v non waterproof ignition system, a 3 position pull style headlight switch, and someone cut out the slave cable dimple on the passenger side

it had a roll bar bolted to the top of the rear fenders, and bucket seats mouted so high that the roll bar was useless and your legs rub the stearing wheel

the M151a1 was the purist one i found no body mods no missing parts, it just looks like it was driven off the surplus yard, given a quick coat of "hillbilly cammo" and abandoned in the woods to rot

heck it still had reminats of a canvas top on it when i found it

Mike

53a1 · Post by **53a1** » Sun Oct 25, 2009 7:54 pm

my cj2a must have been owned by a bondo master because the whole passengers side was bondo and misc tin pieces (traffic signs, license plates, flattened tin cans)

This is definitely worthy of the bubba sticky thread.

If you have a picture of that please post it.