front bumper wood filler
Posted: Mon Dec 07, 2009 6:09 am
On the M38 was the front bumper wood filler block painted?
Page 1 of 1
Posted: Mon Dec 07, 2009 10:38 am
Yes, all originals I have seen were OD. Rod Nowland makes replacements
Filler
Posted: Mon Dec 07, 2009 6:27 pm
Midwest Military also has them in stock.
$30
John
$30
John
Posted: Mon Jan 20, 2014 12:10 pm
Hello folks, I am looking for dimensions of the front bumper wood filler for the M38 Jeep. Although some part sellers do have these for sale, importing wooden stuff from the USA would be a hard job. So my holler of HELP??? 
Many best thanks!
Claudio
Florianopolis, Brazil
Many best thanks!
Claudio
Florianopolis, Brazil
Posted: Mon Jan 20, 2014 4:48 pm
Claudio,
I don't have any dimensions handy. The wood filler fit snugly inside the bumper between the frame rails. There was no filler outboard of the frame rails. Just measure the space inside the bumper. Cut and slide your wood blank into the bumper and then drill the bolt holes.
I don't have any dimensions handy. The wood filler fit snugly inside the bumper between the frame rails. There was no filler outboard of the frame rails. Just measure the space inside the bumper. Cut and slide your wood blank into the bumper and then drill the bolt holes.
Posted: Wed Jan 22, 2014 8:05 am
Looks fine. Thank you. American oak of 1952 will be replaced by local wood.
Posted: Mon Jun 15, 2020 6:19 am
Hello,
From an original part, I made drawings to help people make their own reinforcement!
the holes, I did not specify in the drawing, because the ideal is to align with the existing ones in the original bumper of your jeep !!
Check out my photo page!
http://www.willysmjeeps.com/v2/modules. ... php&page=2
From an original part, I made drawings to help people make their own reinforcement!
the holes, I did not specify in the drawing, because the ideal is to align with the existing ones in the original bumper of your jeep !!
Check out my photo page!
http://www.willysmjeeps.com/v2/modules. ... php&page=2
Posted: Mon Jun 15, 2020 7:50 am
And that, is why this forum is here!