Page 1 of 1
1952 M38 FUEL VENT LINE
Posted: Sat Jan 09, 2010 7:21 pm
by restoreman
Does anyone have a picture of the vent line for the fuel tank , and how it goes across the tank. Thanks Gene
Posted: Sat Jan 09, 2010 8:00 pm
by OKCM38CDN
Vent linecomes out and goes across the tank to the drives side of the tub. Turns forward thru the tub brace, then thru the fire wall. Across the firewall to the airfilter... Total length 86" with 45 inches of loom anthe end attached to the tank...
Also make sure your sender has a 1/4" fitting for the fuel line... if it has a 5/16" it is for the M-38A1 / M-170...
Hope this helps...
Posted: Sat Jan 09, 2010 9:22 pm
by GregS
Is this what you are looking for or something else?
Posted: Sat Jan 09, 2010 9:35 pm
by wesk
Posted: Sun Jan 10, 2010 2:48 pm
by kenperkins
Wes, is that sender in the picture with the Packard end from a M422?
Posted: Mon Jan 11, 2010 3:21 am
by wesk
Ken,
I don't know. The photo is not mine. It could be M422 or even M151.
Fuel vent lines
Posted: Mon Jan 11, 2010 1:58 pm
by restoreman
Thanks everyone for the pictures that is what I needed.