Voltage Regulator splash shield

restoreman · Post by **restoreman** » Sun Jan 17, 2010 4:05 pm

Does anyone have a picture of their m38 regulator shield.

Post by **wesk** » Sun Jan 17, 2010 9:37 pm

Here's a view from the bottom:

From the inboard side:

restoreman · Post by **restoreman** » Mon Jan 18, 2010 6:12 am

Thanks that will work, just wanted to make sure bend was down and not up. Thanks Gene

Post by **wesk** » Mon Jan 18, 2010 9:35 am

Only a short part of the corner is bent down originally. The one in this photo has the entire inboard side hammered down for access to the starter probably by a previous owner.