oil drain plug gasket

Scott21 · Post by **Scott21** » Wed Mar 10, 2010 7:48 pm

What size washer/gasket goes on the oil drain plug?

Scott

Post by **wesk** » Thu Mar 11, 2010 1:33 am

Originally a composited gasket with a Victor number 2129.

The fitting is a 7/8" so a more modern nylon oil drain plug gasket with an ID of 7/8" should work just fine. You could also use a flat copper gasket or even a copper crush type AN900-14.

http://www.aircraftspruce.com/catalog/appages/an900.php

G740 · Post by **G740** » Thu Mar 11, 2010 6:34 am

I stock NOS copper rings for the drain plugs.
www.midwestmil.com
John

Scott21 · Post by **Scott21** » Thu Mar 11, 2010 6:46 am

Wes, John,

Thanks

Scott