Page 1 of 2
am 598u/prc10 radio pic needed
Posted: Thu Mar 18, 2010 6:39 pm
by millertime
does anyone have a pic of a am598u and prc10 mounted in a m38 or a1? thanks
Posted: Thu Mar 18, 2010 10:57 pm
by wesk
http://onfinite.com/libraries/440493/901.jpg
TM 11-5055 covers the AM598 and it's installation.
TM 11-5038 covers the control group accessories.
TM 11-612 covers the PRC-8, -9, -10.
Signal Corp drawing SC-D-28685 shows the M38/M38A1 installation just behind the driver's seat/
You can access the full size drawing here:
http://img.mypicgallery.com/miljeepradi ... -28685.jpg
Posted: Fri Mar 19, 2010 8:18 am
by Bill_F
Wes,
the pics help a lot. I will be mounting mine this weekend. it will go on the passenger side instead of the drivers side. I try to mount like the one in the pictureon the m38a1 but didnt have the room. I now have the wood spacers for an mt299 that I am modifying to use.
Posted: Fri Mar 19, 2010 2:30 pm
by millertime
thanks Wes, I paid more than I wanted for my 598u and havent ordered a manual yet. trying to keep my wife from throwing me out. I will be mounting mine and my Dads in the next few days. I will post pics.. Lowell
Posted: Fri Mar 19, 2010 2:34 pm
by wesk
Lowell,
Try google searching the manual numbers. I often find free PDF download copies that way.
Posted: Sat Mar 27, 2010 4:09 pm
by millertime
its just sitting there. Im going to drill some holes and fix the radio to 598 missing plug shortly.
Posted: Sat Mar 27, 2010 4:33 pm
by Bill_F
I mounted mine as well. Looks like your setup just I put mine on the passenger side.
Posted: Sun Mar 28, 2010 1:15 pm
by millertime
hey Bill, can you post us a pic? I will try to get a pic of my Dads a1 up also. Lowell
Posted: Sun Mar 28, 2010 8:09 pm
by Bill_F
I will try to get one this week sometime.
Posted: Tue Apr 13, 2010 6:03 pm
by millertime
should I repaint it or leave it alone?
Posted: Wed Apr 14, 2010 5:24 pm
by skyjeep50
It's in a beautiful original condition, why repaint? I'd vote for leaving the finish as it is but the decision is yours, of course.
Posted: Thu Apr 15, 2010 1:47 pm
by wesk
In every day use the components were usually serviced individually thus if the radio failed it would be swapped with a loaner or replacement while the power supply stayed withe the jeep and vice versa with the power supply so colors would usually differ somewhat depending on what stocks the units were pulled from and what level the last repairs were done at.
Posted: Sat May 01, 2010 5:33 pm
by Bill_F
Here is a picture of my radio
Posted: Sun May 02, 2010 4:54 pm
by millertime
my Dads a1
Posted: Sun May 02, 2010 4:57 pm
by millertime
does anyone out there have one of these for parts? I have another one but the front panel is broke. lwm1952@yahoo.com Lowell
